ADJ Products, LLC - www.adj.com - Ikon Prole User Manual Page 8 ADJ Products, LLC - www.adj.com - Ikon Prole User Manual Page 9
LED - With this function the LED display will turn off
after 2 minutes.
1. Press the MENU button until “LED” is displayed, press
ENTER.
2. The display will show either “ON” or “OFF”. Press the UP or
DOWN buttons to select “ON” to keep the LED display on at
all times, or “OFF” to allow the LED display to turn o after 2
minutes. Press any button to turn on the LED display again.
3. Press ENTER to conrm and exit.
DISP - This function will reverse the display 180º.
1. Press the MENU button until “DISP” is displayed, press
ENTER.
2. Press the UP button to select “DISP” to activate this func-
tion, or “DSIP” to deactivate this function.
3. Press ENTER to conrm.
MANU - In this submenu you are able to test the dimmer,
and strobe.
1. Press the MENU button until “MANU” is displayed, press
ENTER.
2. Use the UP and DOWN buttons to scroll through the various
functions able for testing. Once you have found your desired
function you would like to test press ENTER.
3. After you have pressed ENTER, use the UP and DOWN but-
tons to adjust the values and test the function. To exit press the
MENU button.
TEST - This function will run a self test program.
1. Press the MENU button until “TEST” is displayed, press
ENTER.
2. The xture will now run a self test.
TEMP - With this function you can check the tempera-
ture of the xture.
1. Press the MENU button until “TEMP” is displayed, press
ENTER.
2. The xture temperature will now be displayed. Press MENU
to exit.
FHRS - With this function you can display the running
time of the unit.
1. Press the MENU button until “FHRS” is displayed, press
ENTER.
2. The display shows the running time of the unit. Press MENU
to exit.
VER - Use this function to display the Software version of
the unit.
1. Press the MENU button until “VER” is displayed, press
ENTER.
2. The display will show the software version.
Ikon Profile System Menu Ikon Profile System Menu