ADJ Products, LLC - www.adj.com - Mega Bar RGBA User Manual Page 3
Mega Bar RGBA Features
Mega Bar RGBA Warranty Registration
The Mega Bar RGBA carries a 3-year limited warranty. Please fill out the enclosed
warranty card to validate your purchase. All returned service items whether under
warranty or not, must be freight pre-paid and accompany a return authorization (R.A.)
number. The R.A. number must be clearly written on the outside of the return package.
A brief description of the problem as well as the R.A. number must also be written down
on a piece of paper included in the shipping carton. If the unit is under warranty, you must
provide a copy of your proof of purchase invoice. You may obtain a R.A. number by
contacting our customer support team on our customer support number. All pack- ages
returned to the service department not displaying a R.A. number on the outside of the
package will be returned to the shipper.
The unit should be mounted using a mounting clamp (not provided), affixing it to the
mounting bracket that is provided with the unit. Always ensure that the unit is firmly
fixed to avoid vibration and slip- ping while operating. Always ensure that the structure
to which you are attaching the unit is secure and is able to support a weight of 10 times
the unit’s weight. Also, always use a safety cable that can hold 12 times the weight of
the unit when installing the fixture. The equipment must be installed by a professional,
and it must be installed in a place where it is out of the reach of people’s grasp.
Mega Bar RGBA Installation
• Mulit-Colors
• Six Operating Modes
• Electronic Dimming 0-100%
• Built in Microphone
• DMX-512 protocol
• 3-Pin DMX Connection
• Seven DMX Modes: 4 Channel Mode, 6 Channel Mode, 7 Channel Mode, 9 Channel
Mode, 10 Channel Mode, 18 Channel Mode, and 34 Channel Mode.
• ADJ RFC compatiable (Not Included)
• Power Cord Daisy Chain (See page 23)
To Next Page
Loading...
