EasyManua.ls Logo

ADJ VF VOLCANO - Maintenance and Troubleshooting; Fuse Replacement; Proper Storage and Maintenance; Troubleshooting

ADJ VF VOLCANO
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
If you experience low fog output, pump noise, or no fog output at all, disconnect the device from
power and discontinue use immediately. Do not continue to push the remote control’s activation
button, as this may damage the device. Check uid level, the external fuse or breaker, and remote
connection, and verify that the wall outlet is sending power. If none of these factors prove to be the
cause of the problem, and the unit still fails to operate correctly, the unit may require service. Please
contact customer support for further instructions. Please do not return the unit to your dealer without
contacting customer support rst.
TROUBLE SHOOTING
Store your device only in a cool area, and cover the device to prevent dust buildup. When storing for
long periods of time, it is highly advised to at least run the device every 3-4 months, as long periods
of inactivity can severely shorten the operational life. Only run water based fog juice through your
device. Never run plain water, vinegar, or any other liquid solution through your device, as running
anything other then water based fog juice will cause severe damage.
PROPER STORAGE AND MAINTENANCE
FUSE REPLACEMENT
Disconnect the unit from its power source, then remove the power cord from the unit. Once the cord
has been removed, locate the fuse holder inside the power socket. Insert a at-head screw driver
into the power socket and gently pry out the fuse holder. Remove the bad fuse and replace with a
new one. Please note that the fuse holder also has a holder for a spare fuse.

Other manuals for ADJ VF VOLCANO

Related product manuals