ADJ XS 200 - Page 7

ADJ Products, LLC - www.adj.com - XS 200 User Manual Page 12 ADJ Products, LLC - www.adj.com - XS 200 User Manual Page 13
BACL - With this function you can have the LED display
turn off after 10 seconds.
1. Press the MENU button until “BACL” is displayed, press ENTER.
2. The display will show either “ON” or “OFF”. Press the UP or
DOWN buttons to select “ON” to keep the LED display on at all
times, or “OFF” to switch to have the LED display switch o after 10
seconds.
DISP - This function will reverse the display 180º.
1. Press the MENU button until “DISP” is displayed, press ENTER.
Either “On” or “Off” will be displayed.
2. To “ip” the display press the UP or DOWN buttons until “On” is
displayed, press ENTER. To activate normal display, select “Off” and
press Enter.
NAN - In this submenu you are able to test the different
functions.
1. Press the MENU button until “NAN” is displayed, press
ENTER.
2. Use the UP and DOWN buttons to scroll through the various
functions able for testing. Once you have found your desired
function you would like to test press ENTER.
3. After you have pressed ENTER, use the UP and DOWN but-
tons to adjust the values and test the function. To exit press the
MENU button.
HRS - With this function you can display the running time
of the unit.
1. Press the MENU button until “HRS” is displayed, press ENTER.
2. The running time of the xture will now be displayed. Press MENU
to exit.
XS 200 System Menu
VER - Use this function to display the Software version of
the unit.
1. Press the either the MENU button until “VER” is displayed, press
ENTER.
2. The display will show the software version.
REST - Use this function to reset the unit.
1. Press the MENU button until “REST” is displayed, press ENTER.
2. The xture will now reset.
BALA - With this function you can adjust the RGBW
colors to make your desired color.
1. Press the MENU button until “BALA” is displayed, press ENTER.
2. Use the UP or DOWN buttons to nd the color you wish to adjust.
3. Once you nd the color you want to adjust press ENTER, the
displayed value will begin to ash. Use the UP or DOWN buttons to
adjust the value. Once you have made your adjustment press ENTER.
4. Repeat steps 2-3 until satised.
XS 200 System Menu