2 Introduction
1.2 Specifications
DLAP-301-Nano DLAP-301-Nano-L DLAP-301-JNX
System Core
Processor Jetson Nano Jetson NX
Memory 4GB 8GB
eMMC 16GB
Display Output
Graphic Output 1x HDMI 2.0
Front I/O
USB 3.0 1x Type-A
USB 2.0 OTG
HDMI 1 vertical HDMI connector
Rear I/O
Ethernet 1x GbE
PoE 8x PoE (15W each, 10/100 Ethernet)
USB 3.0 2x Type-A
Serial Port 2x COM
DIO 4x input / 4x output
Internal I/O
Expansion Socket 1x full Mini PCIe
Storage Devices
SATA Extension 2.5" SATA SSD
Power Requirements
DC Input 12V DC-input
AC Input
1. AC adapter
2. AC to DC board (reserved connector only)
Fail Reset Reset/recovery button
Power LED Indicator Power Button
Remote Power Switch Molex 4-pin 3.00mm pitch Micro-Fit 3.0 header
Table 1-1: Specifications
To Next Page
Loading...
