ADLINK Technology DLAP-301 Series - Volt DC Connector; Power Button; Table 1-8: 12 Volt DC Connector Pin Definition

Introduction 13
DLAP-301 Series
1.6.5 12 Volt DC Connector
The system requires a DC power source with a 4-pin terminal
block.
Table 1-8: 12 Volt DC Connector Pin Definition
1.6.6 Power Button
The power button is a non-latched push button with a blue LED
power indicator. If the system is powered off when the button is
pressed, the system powers up and the blue LED lights up. If the
system hangs, pressing and holding the button continuously for 5
seconds performs a hard shutdown on the system.
Pin Signal
1( - )
2( - )
3( + )
4( + )