Important Safety Instructions 27
DLAP-301 Series
Important Safety Instructions
For user safety, please read and follow all instructions, Warnings,
Cautions, and Notes marked in this manual and on the associated
device before handling/operating the device, to avoid injury or
damage.
S'il vous plaît prêter attention stricte à tous les avertissements et
mises en garde figurant sur l'appareil , pour éviter des blessures
ou des dommages.
X Read these safety instructions carefully.
X Keep the User’s Manual for future reference.
X Read the Specifications section of this manual for detailed
information on the recommended operating environment.
X The device can be operated at an ambient temperature of
55ºC.
X
When installing/mounting or uninstalling/removing device, or
when removal of a chassis cover is required for user servicing:
Z Turn off power and unplug any power cords/cables.
Z Reinstall all chassis covers before restoring power.
X To avoid electrical shock and/or damage to device:
Z Keep device away from water or liquid sources.
Z Keep device away from high heat or humidity.
Z Keep device properly ventilated (do not block or cover
ventilation openings).
Z Always use recommended voltage and power source
settings.
Z Always install and operate device near an easily acces-
sible electrical outlet.
Z Secure the power cord (do not place any object on/over
the power cord).
Z Only install/attach and operate device on stable surfaces
and/or recommended mountings.
X If the device will not be used for long periods of time, turn off
and unplug it from its power source
X
Never attempt to repair the device, which should only be ser-
viced by qualified technical personnel using suitable tools
To Next Page
Loading...
