ADOBE AUDITION 3.0
User Guide
220
See also
“Edit MIDI notes” on page 218
“Prevent changes to MIDI data” on page 220
Edit velocity data
1
In the track controls, click the Velocity button .
2 In the grid, drag the top of velocity lines up or down. (Ctrl-click to select multiple lines and adjust them simulta-
neously.)
Assign a hardware control to a parameter
1
In the track controls, click the Controller button .
2 From the pop-up menu, select the parameter.
3 Click Learn.
4 On the MIDI hardware controller, move the knob, slider, or wheel you want to control the parameter.
Edit controller data
1
In the track controls, click the Controller button .
2 From the pop-up menu, select the parameter.
3 In the grid, drag the top of controller bars up or down. (Ctrl-click to select multiple bars and adjust them simul-
taneously.)
Prevent changes to MIDI data
When editing a particularly complex MIDI composition, you might inadvertently change existing note, velocity, or
controller data on sequencer tracks. To protect a track from changes, lock it.
❖ In the track controls, click the Lock button .
See also
“Freeze effects and improve performance” on page 109
To Next Page
Loading...