Adobe FRAMEMAKER 10 - Page 116

ADOBE FRAMEMAKER 10
MIF Reference
111
Usage
Unless the generic object data indicates otherwise, the MIF interpreter assumes that each graphic frame inherits the
properties of the current state.
A
Frame statement that is contained within an AFrames statement defines an anchored frame. Any other Frame
statement defines an unanchored frame. The assumed value for
FrameType is NotAnchored.
For anchored frames, an AFrame statement that refers to the frame ID indicates where the anchored frame appears
within the text flow (see “ParaLine statement” on page 125).
Specifications for the position and alignment of anchored frames are described in the following sections.
<FrameType keyword >
Whether graphic frame is anchored, and if anchored, the position of the anchored
frame
keyword can be one of:
Below
Top
Bottom
Inline
Left
Right
Inside
Outside
Near
Far
RunIntoParagraph
NotAnchored
<Tag tagstring >
Name of graphic frame
<Float boolean >
Yes floats graphic frame to avoid large white space that results when anchored
frame and the line containing it are moved to the next page
<NSOffset dimension >
Near-side offset
<BLOffset dimension >
Baseline offset
<AnchorAlign keyword >
Alignment of anchored frame
keyword can be one of:
Left
Center
Right
Inside
Outside
<AnchorBeside keyword >
Whether the graphic frame is anchored outside of a text frame or a column in a
text frame
keyword can be one of:
Column
TextFrame
<Cropped boolean >
Yes clips sides of graphic frame to fit column
<Frame…>
Other graphic frames within this frame
Graphic object statements
Objects in the graphic frame (see page 104)
>
End of Frame statement