Adobe FRAMEMAKER 10 - Page 122

ADOBE FRAMEMAKER 10
MIF Reference
117
The record specified by the ImportHint statement uses the following syntax:
record_vers vendor format_id platform filter_vers filter_name
Note that the fields in the record are not separated by spaces. For example:
`0001PGRFPICTMAC61.0 Built-in PICT reader'
The rest of this section describes each field in the record.
record_vers is the version on the record (for example, 0001).
vendor is a code specifying the filter’s vendor. The code is a string of four characters. The following table lists some
of the possible codes.
Note that this is not a comprehensive list of codes. Codes may be added to this list by Adobe or by developers at your
site.
format_id is a code specifying the format that the filter translates. The code is a string of four characters. The
following table lists some of the possible codes.
Code Description
‘PGRF’
Built-in FrameMaker filters
‘FAPI’
External FDK client filter
‘FFLT’
External FrameMaker filters
‘IMAG’
External ImageMark filters
‘XTND’
External XTND filters
Code Description
‘PICT’
QuickDraw PICT
‘WMF’
Windows MetaFile
‘EPSF’
Encapsulated PostScript (Macintosh)
‘EPSI’
Encapsulated PostScript Interchange
‘EPSB’
Encapsulated PostScript Binary (Windows)
‘EPSD’
Encapsulated PostScript with Desktop Control Separations (DCS)
‘SNRF’
Sun Raster File
`PNTG’
MacPaint
‘PCX’
PC Paintbrush
‘TIFF’
Tag Image File Format
‘XWD’
X Windows System Window Dump file
‘GIF’
Graphics Interchange Format (CompuServe)
‘MIF’
Maker Interchange Format
‘FRMI’
FrameImage
‘FRMV’
FrameVector
‘SRGB’
SGI RGB