ADOBE FRAMEMAKER 10
MIF Reference
281
Font word spread value (0x33)
Specifications of object op codes
This section describes each object op code. Op codes are listed by number and description. The op code number is
shown in parentheses.
Ellipse (0x80)
Polygon (0x81)
Example: 32 00000004 00008000
for a font kerning of 50% of an em downward (0.50)
32 00000004 FFFF8000
for a font kerning of 50% of an em upward (-0.50)
Specification by data type: Metric
Description of data: Percentage of spread
Size of data in bytes: 4
Default value: default word spread
Example: 33 00000004 00008000
for a word spread of 50% (0.50)
33 00000004 FFFF8000
for a word spread of -50% (-0.50)
Specification by data type: Rectangle
Description of data: Position and size of ellipse in points
Size of data in bytes: 16
Example: 80 00000010 01320000 00240000 007E0000 007E0000
for an ellipse with the following specifications:
x position = 306 points (0132)
y position = 36 points (0024)
width = 126 points (007E)
height = 126 points (007E)
Specification by data type: Long, point, ..., point
Description of data: Number of points (long)
Position of each point in points (point, ..., point)
Size of data in bytes: Variable
To Next Page
Loading...