Need help?Do you have a question about the ADS-tec IRF1401 and is the answer not in the manual?
General| Product Type | Industrial Router |
|---|---|
| Cellular | 4G LTE |
| Ethernet Ports | 2 |
| Input Voltage Range | 9-36 VDC |
| Protection Class | IP30 |
| Serial Ports | 1 x RS232 |
| Power Supply | 24 V DC |
General information about the instruction manual and device usage.
Details ADS-TEC's liability limitations regarding device use and maintenance.
Identifies ADS-TEC Industrial IT GmbH as the manufacturer of the product.
Lists essential documents for device setup and operation, including manuals and data sheets.
Explains how safety instructions are classified and presented in the manual.
Describes how hazards are classified based on signal words and risk levels.
Defines warning symbols (DANGER, WARNING, CAUTION) and attention notices.
Details symbols for battery disposal, WEEE, and protective earth connection.
Statement on the accuracy and subject to change nature of data, figures, and text.
Acknowledges software/hardware trademarks and company brand names used in the documentation.
Outlines copyright protection and permitted usage rights for the instruction manual.
Declares CE marking and compliance with EU directives; covers FCC Class A digital device.
Provides safety precautions for connecting cables and performing installation work.
Specifies requirements for the industrial operating environment and prohibits non-specified locations.
Warns about shutting down the device if signs of damage from improper use are evident.
States that repairs during warranty must be performed only by the manufacturer or authorized personnel.
Defines the device's purpose for IT security, remote maintenance, and industrial applications.
Defines improper use and states ADS-TEC is not liable for damages resulting from it.
Details safety measures against electrostatic discharge and requirements for installation work.
Covers safety warnings related to radio interference, wireless connections, and lightning strikes.
Provides an example calculation for Effective Isotropic Radiated Power (EIRP) and antenna gain limits.
Specifies UL approval requirements, including indoor use and fuse replacement by the manufacturer.
Presents a table comparing different IRF1000 series equipment versions and their interfaces.
Explains the function of the 24V digital input for Ethernet uplink disconnection.
Describes the event log feature for saving and reading events locally or via a syslog server.
Informs about the integrated LTE modem enabling mobile radio connections.
Lists the items included in the package for the industrial router and firewall.
Details the specified ambient temperature and humidity ranges for device operation and storage.
Provides detailed external dimensions of the industrial router and firewall with diagrams.
Explains the step-by-step procedure for mounting the device on a top-hat rail.
Describes how to connect the mobile communications antenna to the device.
Provides an overview of the status of various interfaces indicated by integrated LEDs.
Details LED behavior during boot-up, reset, and firmware updates.
Describes the interfaces of the device, including power supply and requirements.
Outlines the initial configuration steps, requiring a PC connection via RJ45 network cable.
Guides on configuring the network adapter's IP address and subnet mask for PC connection.
Explains how to access the device's web interface using its IP address and default login credentials.
Provides contact information for ADS-TEC support team availability and methods.
Lists the company address, phone number, email, and website for ADS-TEC Industrial IT GmbH.
To Next Page
