ADS FlashLogic FLRSBA - Valet Mode Procedure

Patent No. US 8,856,780 CA 2759622 FLRSBA + CODE ALARM
>>
01
02
ENGINE
START
STOP
OFF ACC ON START
ON
03
04
05
ENGINE
START
STOP
OFF ACC ON STARTOFF
06
07
TYPE 6 - VALET MODE - 1 OF 1
The following procedure triggers the Valet
Mode.
NOTE: In Valet Mode, the Remote starter is not
functional. Keyless entry, Lock and Unlock will
remain functional.
Set ignition to ON position.
Press and hold the antenna button for 5
seconds.
The parking lights will fl ash once [1x], the
horn will chirp once [1x], the antenna LED will
turn ON.
Set ignition to OFF position.
Valet Mode completed.
To exit valet mode, repeat steps 2 to 3. The
parking lights will fl ash twice [2x], the horn
will chirp twice [2x], the antenna LED will turn
OFF.
www.idatalink.comAutomotive Data Solutions Inc. © 2022 FLRSBA
PAGE 16 OF 45
• 20220110FLRSBA + CODE ALARM