ADS FlashLogic FLRSBA - Remote Programming Procedure

Patent No. US 8,856,780 CA 2759622 FLRSBA + CRIMESTOPPER
>>
>>
01
ENGINE
START
STOP
OFF ACC ON START
ON
02
03
04
05
06
07
08
ENGINE
START
STOP
OFF ACC ON STARTOFF
09
10
11
>>
TYPE 1 - REMOTE PROGRAMMING - 1 OF 1
The following procedure programs
aftermarket remotes to the remote starter.
WARNING: Program aftermarket remotes
before usage. A maximum of four [4x]
aftermarket remotes per system.
Set ignition to ON position.
Press and release the antenna button three
times [3x].
The parking lights will fl ash once [1x], the
horn will chirp once [1x].
The remote starter LED will turn RED and the
antenna LED will fl ash.
Press once [1x] on LOCK button of aftermarket
remote.
The remote starter LED will fl ash GREEN once
[1x] then will turn RED.
To program additional remotes: repeat steps 5
to 6 using each additional remote.
Set ignition to OFF position.
The remote starter LED will turn OFF and the
antenna LED will turn OFF.
The parking lights will fl ash twice [2x], the
horn will chirp twice [2x].
Remote Programming completed.
TO DELETE ALL REMOTES: repeat steps 1 to
4 then press and hold the antenna button for
6 seconds. The parking lights will fl ash twice
[2x], the horn will chirp twice [2x].
www.idatalink.comAutomotive Data Solutions Inc. © 2022 FLRSBA
PAGE 20 OF 45
• 20220110FLRSBA + CRIMESTOPPER