adstec TabX ITC8113 - Electrostatically Sensitive Components; Cleaning the Device

To Next Page

To Previous Page

ITC8113 / TabX® 18

3.7 Electrostatically sensitive components

ATTENTION

Damage due to electrostatic discharges

 All installation and service work performed on the device must be performed

only under safe, secure and de-energised conditions.

Always adhere to the safety measures applicable when handling components at

risk of being damaged by electrostatic discharges.

The provisions of DIN EN 61340-5-1 / DIN EN 61340-5-2 apply.

3.8 Cleaning the device

For cleaning we recommend applying a cleaning agent for household use.

Additionally, we have tested the following disinfectant: Meliseptol® produced by

B. Braun Melsungen AG. It can be used following the recommendations for use and dosage

indicated by the manufacturer.