– 48 –
System Programming (cont’d)
Changing Open/Close Schedule Limits
Use the procedure below to change the earliest open times and the latest
close times for the system.
1. Using the operating panel’s numeric keypad, enter a valid ID code that
has been assigned the privilege level of "Can change perm sched."
2. Press More twice to display Action Menu 3.
3. Press Time to display the Time Selection Menu.
Time Selection Menu
? Time:
Holiday Daylight
Open/close Hstg
Quit Current
4. Press Open/close to display “Group Description” selector buttons.
5. Press Previous or Next to display the desired “Group Description” of the
schedule to be changed.
6. Press the “Group Description” button to display the “Schedule limits”
selector button.
7. Press Schedule limits to display the limits currently set in the system.
8. Press Change to display selector buttons "Earliest open" and "Latest
close."
9. Press Earliest open or Latest close to display the current earliest open
and latest close time.
10. Using the operating panel’s numeric keypad, enter the new earliest open
or latest close time (enter hours only).
To Next Page
Loading...
Need help?
General
