– 50 –
System Programming (cont’d)
4. Press Holiday to display holiday descriptions and dates.
5. Press Previous or Next to display the holiday description and date you
want to change, or to display an unassigned holiday description and date.
6. Press Change to display the selector buttons for entering the new holiday
description.
The first line of the screen displays the current name with the cursor on the
first letter of the description.
7. Use the POS (Cursor Position) keys to move the cursor to the right and
left through the description. Use the CHR (Character) keys to scroll
forward and backward through the character list (letters, numbers,
symbols, and spaces).
Similarly, you may change characters directly by using the alphanumeric
keypad, which is organized like the TouchTone dial on a telephone.
• Letters are entered by pressing the key corresponding to them on the
keypad. Pressing a key once, twice, or three times enters the first,
second, or third letter shown on the button. For example, press the 5 key
three times to enter the letter L. The letters Q and Z are the fourth
letters for the 7 and 9 keys, respectively.
• Numbers are entered by pressing the 0 key once to enter the number 0,
or by pressing the 0 key repeatedly to scroll through the numbers until
the correct one is displayed.
• Spaces are entered by pressing the 1 key.
• Symbols are entered by pressing the 1 key then using the CHR
(backward and forward) keys to scroll through the entire character set.
Hint: Scrolling through the entire alphabet will take less time if you hold
the keys down instead of pressing and releasing them.
8. Press Continue to enter a new holiday date, or press Quit to display
another holiday description and date.
To Next Page
Loading...
Need help?
General
