– 67 –
Bypassing Protection Points
Note: A bypassed point cannot detect intrusion or an alarm condition.
Before resorting to bypassing a point, attempt to repair or correct the
problem.
1. Using the operating panel’s numeric keypad, enter a valid ID code that
has been assigned the privilege level of "Can bypass BA."
System Operation (cont’d)
2. Press More twice to display Action Menu 3.
3. Press Bypass to display the Bypass Selection Menu 1.
Bypass Selection Menu 1
? What Type?
Special Burglar
Supervisory Fire
Quit Holdup
Note: Special, Supervisory, Fire, and Holdup will be displayed only if the
user has privilege level of "Can bypass FA/HU/SPV."
4. Press Burglar to display the Group Selection Menu.
Group Selection Menu
? Which group:
Group Description
Previous Next
Quit
5. Press Previous or Next to display the “Group description” that contains
the point(s) you want to bypass.
To Next Page
Loading...
Need help?
General
