The OC845 uses a smart IR function for night viewing. This means that the
camera automatically adjusts the IR light output and gain. As a result, if any
objects are in the close foreground of the image, the camera lowers the IR
light output to prevent overexposing those objects. The drawback of the
smart IR function is that this feature causes background objects to receive
less IR light and to be displayed with lessened detail. This result is typical for
the smart IR function
6 Troubleshooting
This section provides details for troubleshooting wireless
connection issues of the OC845 Outdoor Day/Night FHD Camera.
6.1 If the Camera Continually Goes Offline
If after it is enrolled the camera continually goes offline (LED blinks green
continually), the camera will automatically attempt to recover the wireless
connection. If the camera cannot recover on its own, take the following
measures to re-establish the Wi-Fi connection.
• Power cycle the camera.
• If the previous measure fails, power cycle the gateway.
• If the previous measure fails, move the gateway closer to the camera, if
possible.
• If the previous measure fails, press the camera’s reset button for 15
seconds, and then re-enroll the camera into the platform.
• If the previous measure fails, install a Wi-Fi Range Extender
- EX6100 for Control
- WN3000RPH-3ADPAS for Pulse
To Next Page
Loading...
Need help?
General
