1 Introduction
This section provides information about the OC845 Outdoor Day/Night FHD
Camera's features, components and capabilities.
1.1 Feature Overview
The OC845 is an Outdoor day/night camera with FHD resolution and 802.11ac
Wi-Fi connectivity intended for use with both ADT Control® and Pulse®.
• Standalone Design. The camera is a standalone system with built-in CPU
and video encoder. It requires only a power source and a connection to the
network (Customer router for Control
or ADT Pulse gateway).
• Dual Video Support. The OC845 supports H.264 and MJEPG video
compression.
• Day/Night Switch. With the day/night switching feature, you can view and
record images even at night.
• IR LED Support. The two infrared LEDs can provide illumination for up to 5
meters/16 feet, providing superior video quality under low-light conditions.
• PIR (Passive Infrared Sensor) Support. The embedded PIR Sensor senses
infrared light radiating from human bodies in its field of view.
• Built-in Heater. The built-in heater ensures that the camera will continue to
operate even in extremely cold outdoor climates. The heater turns on when
the temperature falls below 42°F (6°C).
• 802.11ac Support. The 802.11ac standard provides backward
compatibility with the 802.11b, g and n standards.
• Supports both Soft AP and WPS. Soft AP connectivity is used on the Control
platform. Wi-Fi Protected Setup (WPS) uses a push button to connect to the
Pulse platform.
• Wireless Network. The OC845 is connected to the network wirelessly.
• Two-Way Audio. The OC845 has a speaker and microphone for two-way
conversations and echo cancellation.
To Next Page
Loading...
Need help?
General
