• Enter the wireless credentials and click Save.
• The LED will turn solid green when data is being transmitted indicating that
the connection to the Customer’s router is complete.
• Connect a laptop or mobile device to the Customer’s network and log in to
the Control web portal, https://www.adt.com/control-login, to complete the
setup.
• Select Video from the menu list.
• Click Settings and select Add Video Device.
• Select install from the video device list to begin adding camera. If a laptop
or mobile device are not on the Customer’s network, then enter the MAC
address of the camera.
• Follow the on-screen instructions to finish adding the camera.
To Next Page
Loading...
Need help?
General
