11
Personal Assistance Alarm
The Personal Assistance Alarm allows you to send an alert to the ADT Alarm
Monitoring Centre if you feel vulnerable in your home.
Step 1:
Activate the Personal Assistance Alarm using the Keypad – by pressing and holding
and keys simultaneously for 2 seconds.
Step 2:
The Internal Sounder is activated and now sounds (unless a silent mode was
requested at the point of installation).
Step 3:
The System sends an alert signal to the ADT Alarm Monitoring Centre. Our
monitoring experts respond fast by contacting you and your Keyholders to alert them
to your emergency. Please note that ADT will not be able to contact Police on your
behalf.
Important: The Personal Assistance Alarm function works even when your System is
not set.
To Next Page
Loading...
Need help?
General
