Adtech ADT-CNC4640 User Manual

Adtech CNC Technology Co., Ltd. 11. Program saving & editing
- 56 -
049 Controler ID
Range : 1~255
Unit : None
Authority : Operation admin or higher
Default : 1
Effective time : Restart
Note : The ID number setting of the controller when DNC or other PC software
and this controller are in MODBUS communication mode
050 X HomeDir
051 Y HomeDir
052 Z HomeDir
053 4 HomeDir
Range : 0~1
Unit : None
Authority : Operation admin or higher
Default : 1, 1, 0, 0
Effective time : Instant
Note : Set the mechanical home direction of every processing axis
Positive
Negative
054 Circle InpUnit(mm)
Range : 0~1
Unit : mm
Authority : Operation admin or higher
Default : 0.2
Effective time : Instant
Note : Set the arc interpolation equivalent
If this value is too small, the arc has higher approximation accuracy, but
the computation will be too high, making the pause during processing
obvious and affecting the processing effect.
055 G73(M)LoopObligate(mm)
056 G83(M)LoopObligate(mm)
Range : 0.1~100
Unit : mm
Authority : Operation admin or higher
Default : 2.000
Effective time : Instant
Note : Set the tool retracting amount after Q is fed in G73 and G83 instructions; this
parameter (default: 2mm) is set according to actual chip removal effect.
057 ArcSpeedUpVal
Range : 10~500
Unit : mm/sec
Authority : Operation admin or higher
Default : 100
Effective time : Instant
Note : Set arc acceleration equivalent
If this value is too small, the acceleration will be slow; please select a
higher value according to the arc size.
058 interpolation speed mode
Range : 0~1
Unit : None
Authority : Operation admin or higher
Default : 0 (acceleration)

Adtech ADT-CNC4640 Specifications

General

Brand	Adtech
Model	ADT-CNC4640
Category	Controller
Language	English