Adtech CNC Technology Co., Ltd. 11. System parameters
- 61 -
092 Pretreatment segments
Range : 10~200
Unit :
Authority : Operation admin or higher
Default : 20
Effective time : Instant
Note : Pretreatment forward segments are used to set the segments of
pretreatment preview.
The larger this value is, the greater the operation is, and the longer the
waiting time before motion is.
During small segment interpolating, if this value is larger, the possibility
of waiting for operation during motion will become higher; the balance
value is set according to the actual processing effect.
If this value is smaller, the balance value is set according to the actual
price effect because the forward data are insufficient and the speed can’t
be improved during small segment interpolating.
093 feed speed setting En
Range : 0~1
Unit :
Authority : Operation admin or higher
Default : 0
Effective time : Instant
Note : This parameter is used to modify the interpolation speed in
programming, making F programming invalid.
Used for the cases that processing codes requires ignoring F-value.
094 enable of G00 Inp mode
Range : 0~1
Unit :
Authority : Operation admin or higher
Default : 0
Effective time : Instant
Note : Used to set whether G00 instruction is moved with G01 mode
If G01 mode is used, the interpolation speed shall follow the setting of
minimum speed;
The acceleration is the interpolation acceleration.
To Next Page
Loading...
Need help?
General
