Adtech CNC9960 - Page 141

ADTECH9 Series CNC Maintenance Manual
- 136 -
A Server Enable Output Port No.
B Server Enable Output Port No.
C Server Enable Output Port No.
Range : 0~8888
Unit :
Authority : Operation admin or higher
Default : 0
Effective time : Instant
Note : To set the servo enable output port number of each axis
010
X Server Alarm Input Port No.
Y Server Alarm Input Port No.
Z Server Alarm Input Port No.
A Server Alarm Input Port No.
B Server Alarm Input Port No.
C Server Alarm Input Port No.
Range : 0~8888
Unit :
Authority : Operation admin or higher
Default : 0
Effective time : Instant
Note : To set the input signal port number of receiving detection servo alarm
011
X Server Reset Output Port No.
Y Server Reset Output Port No.
Z Server Reset Output Port No.
A Server Reset Output Port No.
B Server Reset Output Port No.
C Server Reset Output Port No.
Range : 0~8888
Unit :
Authority : Operation admin or higher