Need help?Do you have a question about the Adtech DJ8849V2-A01 and is the answer not in the manual?
General| Output Voltage | 5V DC |
|---|---|
| Storage Temperature | -40°C to +85°C |
| Weight | 150g |
| Humidity | non-condensing |
| Protection | Short Circuit |
| Efficiency | 85% |
Instructions for safe and correct electrical wiring practices.
Procedures for safe maintenance and component replacement.
Miscellaneous safety and operational advice.
Procedures for regular checks of the system's environment and components.
Tasks for a comprehensive yearly inspection of the equipment.
Steps to set up the system for extrusion mode operations.
Configuration for controlling glue gun and workpiece rotation.
Defines key parameters essential for the dispenser's reset function.
Configuration of the pulse transmission mode for axis movement.
Setting the correct direction for the reset operation.
Procedure for setting the pulse equivalent for accurate movement.
How to test origin and limit switch signals for proper function.
Steps and potential issues when executing a system reset.
Step-by-step guide to editing dispensing paths.
Configuration of speeds for various movements and operations.
Settings for controlling glue dispensing timing and distance.
Initial setup of core system parameters.
Detailed configuration for motor behavior, including pulse settings and reset modes.
Settings for system output signals and indicators.
Configuration of system input signals and external controls.
Procedure for updating firmware on controller units.
Steps to update the handheld unit's software using a USB drive.
Details on connecting input signals to the MCD904 controller.
Details on connecting output signals from the MCD904 controller.
Diagrams and pin descriptions for ADT-8849 input ports.
Diagrams and pin descriptions for ADT-8849 output ports.
Definitions for ADT-8849 motor driver connections.
Details on connecting input signals to the AMC-1600 controller.
Details on connecting output signals from the AMC-1600 controller.
Definitions for AMC1600 motor driver connections.
To Next Page
