ADTECH9 Series CNC Maintenance Manual
- 168 -
10.5
Tool magazine parameter (P4.)
001 Customized by manufacturer
Range :
Unit :
Authority : Operation admin or higher
Default :
Effective time : Instant
Note : This parameter is determined by tool magazine design of each machine
tool manufacturer. Please refer to the machine too manuals for details.
10.6
Spindle parameters (P5.)
001 1
st
spindle mapping axis
Range : Analog Spindle X Y …. C
Unit :
Authority : Operation admin or higher
Default : Analog Spindle
Effective time :
Note : To set the first spindle to specify the analog spindle or servo spindle
002 2
nd
spindle mapping axis
Range : Analog Spindle X Y …. C
Unit :
Authority : Super Admin
Default : Analog Spindle
Effective time : Restart
Note : To set the second spindle to specify the analog spindle or servo spindle
003 Spi. Max Speed(rpm)
Range : 1~30000
Unit : None
Authority : Operation admin or higher
Default : 24000
To Next Page
Loading...
