ADTRAN Total Access 5006 - User Manual

Smart Solutions for a
Connected World.
Total Access 5006 Cabinet Retrofit Kit
for AFC
®
120
Kit Contents
Total Access 5006 Assembly, including:
■ 1187003E1 Total Access
5006 chassis
■ 1187052E1 SMIO-3 Switch
module backplane
■ 1187090E1 Fan module assembly
■ 1187410L1 Backplane modules
for RJ-21 cables (quantity = three
for six cables)
Cabinet Cooling Kit
■ Attaches to roof of cabinet
with existing hardware
■ Supports one Total Access 5006
■ Adds speed control and
alarm functionality
■ Replaces existing fan to extend
usable life of the OSP enclosure
Valere Power
®
System, including:
■ 19-inch, 2U compact
integrated system
■ BC-500 system controller module
■ 10 amp rectifier modules
(quantity = two)
■ Alarm and power cables
■ 2U Breaker Panel
■ RJ-21 extension cables, to allow
use of existing primary protection
Fiber Termination Equipment including:
■ Bulkhead bracket
■ Fiber bulkhead connectors
(FC and SC type)
■ Fiber jumpers
With the demand for higher-bandwidth
services growing at a phenomenal rate, it
is more important than ever to be able to
leverage existing infrastructure in the
delivery of new services. Time to market is
crucial and network redesign or new cabinet
deployment is simply not an option. The solu-
tion is cabinet revitalization. The ADTRAN
®
Total Access
®
5006 Multiservice Access and
Aggregation Platform is the best solution for
revitalizing existing cabinet infrastructure to
deploy higher-bandwidth, next-generation
services easily and cost effectively.
Why Retrofit?
Cost is the major barrier to the deployment
of new services. The average total cost of
placing a new cabinet could approach
$50,000, while the average retrofit costs less
than one-third of the price of a new installa-
tion. Thousands of small line count cabinets,
originally deployed for Plain Old Telephone
Service (POTS), are not equipped to handle
the thermal and power requirements for the
deployment of high- bandwidth services.
However, retrofitting provides a complete
solution for next-generation deployment,
while eliminating the costs associated with
new cabinet fees, cabinet installation,
powering, and right-of-way negotiation.
Retrofitting minimizes capital expenditures
and speeds service deployment. When
compared to a new installation, retrofitting
allows you to upgrade three times as many
cabinet sites with the same amount of money.
Total Access 5006
ADTRAN’s Total Access 5006 is the perfect
retrofit solution for your growing network.
This carrier-class Multiservice Access and
Aggregation Platform was designed with
retrofit applications in mind. Its small form-
factor makes it ideally suited for cabinet
revitalizations. With a pure Ethernet core,
the Total Access 5006 supports both legacy
and emerging service interfaces over copper
and fiber, easily scaling to support even the
most bandwidth-intensive applications, like
Internet Protocol (IP) TV and video. It provides
a clear migration path for traditional services
like voice through its flexible network uplink
options, including support for both TDM
and Voice over IP switches. In addition to
supporting both traditional and next-genera-
tion access interfaces, the Total Access 5006
has an Ethernet core providing a scalable and
cost-optimized aggregation point in the
network, with interfaces ranging from DS1 to
Gigabit Ethernet. The Total Access 5006 is one
of the most flexible platforms on the market
today, not only allowing you to deliver DSL
and POTS, but a variety of next-generation
services for future growth.

Summary

Kit Contents Overview

Total Access 5006 Assembly Components

Details the core chassis and module components for the Total Access 5006 assembly.

Cabinet Cooling Kit Features

Highlights the cooling kit's ability to support one chassis, add speed control, and replace existing fans.

Valere Power System Components

Lists the compact integrated system, controller module, rectifier modules, and cabling for power.

Fiber Termination Equipment

Specifies the necessary hardware for fiber connections, including brackets, connectors, and jumpers.

Benefits of Cabinet Retrofitting

Why Retrofit Your Network?

Explains that retrofitting is a cost-effective solution to leverage existing infrastructure for new services.

Total Access 5006 Platform

Total Access 5006 for Network Retrofits

Describes the platform's suitability for cabinet revitalizations, its small form-factor, and Ethernet core.

Quality and Reliability Assurance

Engineered Retrofit Kits

Details that kits are fully engineered, lab-tested for environmental and mechanical stress, and include support.

Ordering Information

Retrofit Kit Part Numbers

Lists part numbers for the Total Access 5006 Retrofit Kits for various AFC 120 configurations.

ADTRAN Total Access 5006 Specifications

General

Dimensions	17.5 x 12.5 inches
Power Supply	AC 120/230 V ( 50/60 Hz )
Management	Web-based management
Operating Temperature	0 to 40 °C
Humidity	Up to 95% non-condensing
Form Factor	Rack-mountable