Need help?Do you have a question about the ADTRAN Total Access 3000 and is the answer not in the manual?
General| Product Family | Total Access |
|---|---|
| Product Type | Integrated Access Device |
| Supported Protocols | VoIP |
| Interfaces | Ethernet |
| Data Interfaces | Ethernet |
| Form Factor | Rack-mountable |
| Mounting | 19-inch rack |
| Redundancy | Optional redundant power supply |
| Management Interface | SNMP, Telnet |
| Power Supply | AC or DC |
| Dimensions | 17.5" W |
Provides alarm codes, determinations, and LED status information.
Details the main elements that compose the Total Access 3000/3010 system.
Lists and describes the various modules used within the Total Access 3000/3010 system.
Describes the main chassis and its composition, including slots and construction.
Details common modules, including the System Controller Unit (SCU).
Describes the DS3, STS-1, and OC-3 multiplexer modules.
Lists and describes various access modules for local loop technologies.
Illustrates the current draw of each module and different system arrangements.
Details the heat dissipation of each module and system arrangements.
Explains how the DS3 multiplexer converts the system for DSX-3 network interface.
Details how the STS-1 multiplexer accepts STS-1 and DSX-1 network interfaces.
Describes how the OC-3 multiplexer transforms the system into a SONET network element.
Provides details for preparing a CO, MTU, or RT for shelf installation.
Covers power inputs, wiring, and fusing requirements for the shelf.
Provides step-by-step instructions for installing shelves in a CO, MTU, or RT.
Provides step-by-step instructions for installing the DS3 MUX Module into a shelf.
Provides step-by-step instructions for installing the STS-1 MUX Module into a shelf.
Provides step-by-step instructions for installing OC-3 MUX modules into a shelf.
Provides step-by-step instructions for replacing the System Controller Unit (SCU).
Provides instructions for HLSS circuit configuration and turnup for DSX-1 fed systems.
Provides instructions for HLSS circuit configuration and turnup for DS3-fed systems.
Explains how to connect power and ground to the shelves and fan modules.
Describes installing the special adapter for high-speed electrical input.
Provides step-by-step instructions for installing the SCU into the shelf.
Details the provisioning steps for the DS3 MUX module.
Details provisioning the HTU-C line cards according to circuit parameters.
Details test steps to verify shelves are properly installed in a central office.
Details test steps to verify DS3 Multiplexer Modules are properly installed.
Provides detailed steps for acceptance testing the shelf installation.
Provides detailed steps for acceptance testing the DS3 Multiplexer Module.
Provides steps for upgrading the SCU using TFTP.
Provides steps for upgrading the SCU using the Y-modem protocol.
Provides detailed steps for configuring SCA parameters and saving the system configuration.
Provides detailed steps for configuring SCA restore options.
Provides step-by-step instructions for provisioning the OC-3 MUX module.
Details provisioning steps for OC-3 List 2 MUX with Subtended STS-1 List 2 MUX Modules.
Provides a summary of SCU alarms, their descriptions, levels, and LED status.
Provides a summary of DS3 MUX alarms, their descriptions, levels, and LED status.
Provides a summary of STS-1 L1 MUX alarms, their descriptions, levels, and LED status.
Provides a summary of STS-1 L2 MUX alarms, their descriptions, levels, and LED status.
Provides a summary of OC-3 L1 MUX alarms, their descriptions, levels, and LED status.
Provides a summary of OC-3 L2 MUX alarms, their descriptions, levels, and LED status.
Provides a summary of DS3 CSM alarms, their descriptions, levels, and LED status.
Provides a summary of DSX-1 Access Module alarms, their descriptions, levels, and LED status.
Provides a summary of HDSL Access Module alarms, their descriptions, levels, and LED status.
Provides a summary of HDSL Access Module alarms, their descriptions, levels, and LED status.
Provides a summary of HDSL2 Access Module alarms, their descriptions, levels, and LED status.
Provides a summary of Quad DSX-1/E1 Access Module alarms, their descriptions, levels, and LED status.
Provides a summary of Octal DS1 IMA Access Module alarms, their descriptions, levels, and LED status.
To Next Page