Total Access
®
3000/3010 System Manual6TAINT001-1E
About this Manual
ADTRAN’s Total Access 3000/3010 is used to deliver a variety of
digital services, including HDSL, T1, and ISDN, over copper loops,
and four T1s over optical fiber.
This manual provides a complete description of the system and
system software. The purpose of this manual is to provide the
technician, system administrator, and manager with general and
specific information related to the planning, installation, operation,
and maintenance of the Total Access 3000/3010 system. The manual
is arranged so that needed information can be quickly and easily
found. The following is an overview of the contents:
Section 1.0 System Description
Provides users with an overview of the Total Access 3000/3010 system.
Section 2.0 Engineering Guidelines
Provides information to assist network designers incorporating a Total
Access 3000/3010 system into their networks.
Section 3.0 Application Guides (APP)
Provides information on specific Total Access 3000/3010 wiring and
applications.
Section 4.0 Site Preparation (PREP)
Provides information for site engineers who will prepare the site for a
Total Access 3000/3010 installation.
Section 5.0 Installation and Turn-up Pocedures (NTP)
Provides step-by-step instructions for installers on how to install a
Total Access 3000/3010 System and perform system upgrades.
Section 6.0 Acceptance Test Procedures (ATP)
This section is also intended for installers. It outlines steps to test and
verify that the system has been properly installed.
Section 7.0 Detailed Level Procedures (DLP)
Provides the detailed level procedures called out in top-level
procedures.
Section 8.0 Troubleshooting Guide (TSG)
Provides alarm codes, determinations, and LED status information.
Section 9.0 Appendixes
Provides warranty and ADTRAN contact information.
To Next Page
Loading...
