Need help?Do you have a question about the Advanced Instruments 3D3 and is the answer not in the manual?
General| Brand | Advanced Instruments |
|---|---|
| Model | 3D3 |
| Category | Test Equipment |
| Language | English |
Details technical parameters for Model 3D3 Osmometer and Model 4D3 Cryoscope.
Outlines safety precautions, warnings, and regulatory compliance standards.
Instructions for performing instrument calibration procedures for both 3D3 and 4D3 models.
Detailed explanation of the functional blocks and circuitries for Intel processor systems.
Detailed explanation of the functional blocks and circuitries for Hitachi processor systems.
Explains instrument checks performed at power-on and A/D test procedures.
Guide to performing Analog-to-Digital tests for probe and cooling system checks.
Information on updating instrument firmware via a PC.
A comprehensive list of symptoms, explanations, and suggested actions for troubleshooting.
Detailed instructions for replacing the block probe using part 4D3340.
Guide for replacing the main control board set or application/processor boards.
Step-by-step instructions for replacing the cooling assembly (3D3300/4D3300).
Guide for replacing EPROM part 716811R for specific 4D3 models.
Instructions for replacing fuses (70011/70022) based on instrument serial suffix.
Kit and instructions for upgrading the Model 4D3 Cryoscope to ISO 5764 standard.
Procedure for replacing sample probe part 4D3700 for specific models.
Electrical schematic for the PCB600 main board, covering CPU, I/O, and A/D sections.
Wiring diagram illustrating component interconnections for Hitachi processor systems.
To Next Page
