4
Fluorophos® ALP Test System Model FLM300 Service Manual
Safe use
Service & Maintenance Cautions
• Unplug the power cord prior to opening or removing
covers, or else you may be exposed to electric shock,
excessive temperatures, or mechanical hazards.
• Performing service or maintenance not detailed in the
User’s Guide, with or without this Service Manual, should
only be done by a qualified service technician.
• Never restrict airflow into or out of the product.
Occasionally, check the air vents for blockage.
• Wipe the exterior of the product with a soft, damp cloth
as needed. Using cleaning products other than those
specified, may discolor or damage the finish.
• If the product requires service for any of the following
reasons, unplug the product from the electrical outlet and
refer service to a qualified service technician:
1. The power cord, extension cord, power strip or power
input module is damaged.
2. Liquid has been spilled into the interior of the
product.
3. A foreign object has fallen into the product.
4. The product has been dropped or damaged by a
falling object.
5. There are noticeable signs of overheating or a
burning odor.
6. The product does not operate normally when you
follow the operating procedures.
7. The main supply fuse(s) or any internal fuse(s)
continually fail.
• A discharge of static electricity from contact with the
human body or other conductor may damage system
boards or static sensitive devices. Never perform internal
maintenance without following recommended static
protection procedures.
• The product is equipped with operator accessible fuses.
If a fuse blows, it may be due to a power surge or failure
of a component. Replace the fuse only once. If the fuse
blows a second time, it is probably caused by failure of a
component part. If this occurs, refer service to qualified
service personnel. Always replace the fuse with one of
the same rating, voltage, and type. Never replace the fuse
with one of a higher current rating.
• When servicing the product, use only factory specified
parts.
CAUTION: When returning this product for service, or
shipping this product to a second location, remove all
hazardous specimens and decontaminate the product
before packaging for shipment. If the product cannot be
decontaminated, consult with your shipping agent on
appropriate packaging and marking.
• To avoid injury or fire hazard, do not operate this product
in an explosive atmosphere.
To Next Page
Loading...
