14
How To Put Your Hearing Aid On
Step 1
Take the hearing aid with tube and dome
assembly and hang it so it rests over the
top of your ear.
Step 2
Gently insert the dome end of the tube
into your ear canal until it ts snuggly
and comfortably (it should be completely
inside your ear canal opening).
Step 3
Wrap the retention cord (the clear plastic
tail) into the bottom of the outer bowl of
your ear using your index nger. It can be
trimmed shorter to t the size of your ear.
(You may want to le the end if it is too
sharp after cutting.)
Step 4
Check to see if you’re wearing the correct
dome size by gently shaking your head
up and down and then side to side, while
chewing. If the dome slides out, it’s too
small. If you wear glasses, place the arm
between the HCR3 and your head.
IMPORTANT: Never insert the hearing tube into
the ear canal without a dome attached. Also, do not
force the tube and dome too deep into your ear
canal.
How To Put Your HCR3 On
To Next Page
Loading...
Need help?
General