16 17
Assembling the HearClear™ HCR3
With these 3 simple steps, you’ll have your hearing aid
assembled in no time! If you purchased the Power Upgrade
please go to "Thick Tube Assembly" on page 20 .
Step 1
Select the hearing tube with the
red numbering for the hearing
aid you are going to wear on your
right ear.
Select the hearing tube with the
blue numbering for the hearing
aid you are going to wear on your
left ear.
Step 2
Choose the dome that ts you
best and connect it to the hearing
tube by pushing the dome over
the grooves on the tube until it
is secure.
Step 3
Align the hearing tube over the
brass tting that sticks out of
the HCR3 casing. Twist the hard
plastic pyramid at the end of the
tube onto the brass tting in a
clockwise direction until it ts
snugly against the HCR3 casing.
HearClear™ HCR3 Assembly
To Next Page
Loading...
Need help?
General