20 21
Step 4
Hang the hearing aid over the
top of your ear (with just the
earhook attached).
Step 5
Gently push the dome end of
the tube into your ear canal until
it ts snugly and comfortably.
Step 6
Hold the open end of the tube
up to the earhook, noting if
there is an extra length of
tubing.
Step 7
Trim off any unneeded tubing,
leaving 3/16’’ to connect to the
earhook (this will overlap).
Step 8
Connect the tube to the
earhook by gripping the ear
hook and rmly pushing until it
is securely attached.
Thick Tube Assembly Cont’d
To Next Page
Loading...
Need help?
General