Advanjet HM-2600 - Check for Parts Set Aside

2.7 Check for Parts Set Aside
Check that these parts have been set aside. If necessary, remove built-up threadlocker.
FEED TUBE ENCLOSURE
(2) M3 X 14 SHCS
MELTER COVER
(4) M4 X 8 BHCS
DOVETAIL PLATE
(4) M4 X 10 SHCS
MOUNTING PLATE
(2) M4 X 10 SHCS
NOZZLE PLATE
(2) M4 X 55 SHCS
TOP COVER
(2) M4 X 40 SHCS
HEATER BLOCK
(2) M3 X 20 FHMS
SPACER
(1) M3 X 16
(2) M3 X 25
SHUTOFF SPRING
JET VALVE MOUNT
(2) M4 X 20 SHCS
Page 16 of 28 Advanjet HM-2600 Hotmelt Jet Maintenance and Repair 3A6328A