ADVANTAGE AIR e-zone - AAWACA Status

e-zone User Manual
38
If you had numerous systems in the same house you would configure as
follows.
e-zone System #1 = Leave on default port 8035
e-zone System #2 = Set port to 8036
e-zone System #3 = Set port to 8037
AAWACA Status
The below info may be useful to the homeowners I.T professional when
troubleshooting remote access in the AAWACAv2 app.
Status
Cause
Solution
3, 6, 9
No internet access – cannot
contact server
Confirm tablet is connected to the
home Wi-Fi network.
Open browser & confirm you can
load a web page such as
www.google.com.au
Check your router is connected to
the internet.
4
No UPNP detected
Check your router has UPNP
enabled.
7, 10
UPNP is detected but still trying
Ensure router has default firewall
settings.
5, 8, 11
Success
Your remote access should be
working, if you are having
troubles try connecting via Wi-Fi
& clearing stored systems before
retrying remotely.