ADAM-6300 User Manual 28
4.4.1 The Information Tab
This tab shows the firmware version as well as the device name and device descrip-
tion, both of which can be modified from here. Giving your modules a specific name
and description can be useful for when several ADAM-6300 modules are connected
to the same network.
Firmware Version
Indicates the current Firmware version of ADAM-6300 module.
Device Name
Means model name of ADAM-6300 module. You also can rename it for recognition if
required.
Device Description
You can add comments on this module for recognition.
4.4.2 The Network Tab
You can set up required network connection on this page.
Network Setting
You can configure the IP address, Subnet address, Default gateway.
Note! Static IP mode is set to 10.0.0.1 as default.
To Next Page
Loading...
Need help?
General
