FPM-5191G User Manual 18
Appendix B Setting Serial Data for
Expansion
B.1 Setting Serial Data for Expansion
The twelve kinds of timings below are already programmed in this mod-
ule. The input synchronous signals are automatically recognized.
VGA Port Resolution Support
Resolution Vertical Frequencies
60Hz 70Hz 72Hz 75Hz
640 x 480 V V V
720 x 400 V
800 x 600 V V V V
1024 x 768 V V V
1280 x 1024 V V V
DVI Port Resolution Support
Resolution Vertical Frequencies
60Hz 70Hz 72Hz 75Hz
640 x 480 V V
800 x 600 V V V
1024 x 768 V V V
1280 x 1024 V V
Note 1: Even if the preset timing is entered, a little adjustment
of the functions are required. The adjusted values are
memorized in every preset number.
Note 2: This module recognizes the synchronous signals with
near preset timing of the frequency of the HS and
Vsync, even in the case that the signals other than
the preset timing that were entered.
Note 3: Because adjustments may not fit, such as
differing magnifying ratios or, in the case that you use
it except for the display timing that was preset.
To Next Page
Loading...
Need help?
General
