FPM-5191G User Manual 4
1.5 Connectors
The following connectors are situated on the left hand side of the
FPM-5191G Series:
VGA Port (DB-15)
This DB-15 connector can be connected to the system via the external
15-pin DB-15 connector locatd on the left side of the system unit.
DVI Port (DVI-D)
Connected with a standard DVI connector thru I/O port of this unit. Only
supports digital signals
DC 12V Power In
This connector will be connected to the DC 12V Switching Power
Supply.
Plug-In Block 3P Male (ME050-50803) DC10-30V
This block connector can be connected via the external plug-in block 3P
with flanges Female MC211-F103 connector
Touchscreen Connector (DB-9) (optional)
This connector will be present only if a touchscreen is installed. It must
be connected to the RS-232 port of the PC. The touchscreen cable is
included with all orders which include the touchscreen option.
To Next Page
Loading...
Need help?
General
