11 Chapter 2
2.2 Driver Installation
We recommend you install the software driver before you install the
USB-4761 module into your system, since this will guarantee a smooth
installation process.
The 32-bit DLL driver Setup program for the USB-4761 module is
included on the companion CD-ROM that is shipped with your module
package. Please follow the steps below to install the driver software:
Step 1: Insert the companion CD-ROM into your CD-ROM drive.
Step 2: The Setup program will be launched automatically if you have
the auto-play function enabled on your system. When the Setup Program
is launched, you’ll see the following Setup Screen.
Figure 2.1: Advantech Automation Software Setup
Note: If the auto-play function is not enabled on your
computer, use Windows Explorer or Windows Run
command to execute Setup.exe on the companion
CD-ROM.
To Next Page
Loading...