TouchMix
®
XI Computer User Manual Date: 6/10/16 Doc#: 2005SA1800
Page 5
Safety Information
Sensitive to Static Discharge!
Always ground yourself to remove any static charge before touching the CPU board.
Modern electronic devices are very sensitive to static electric charges. As a safety
precaution, use a grounding wrist strap at all times. Place all electronic components
in a static-dissipative surface or static-shielded bag when they are not in the chassis.
Basic Safety Instructions
1.
Equipment does not contain user serviceable parts, do not open.
2.
For proper Installation refer to the appropriate Installation Control Drawing
below.
3.
Read these safety instructions carefully.
4.
Keep this user manual for later reference
5.
Dropping Equipment or letting it fall could cause damage.
6.
Do not leave this equipment in an unconditioned environment
Where the storage temperature is under 0C (32F) or above 40C (104F), it
may damage the equipment.
7.
Use only provided power supply source to power equipment.
8.
All cautions ad warnings on the equipment should be followed.
To Next Page
Loading...
Need help?
Power
Ports & Interfaces
Weight and Dimensions
