Advice 600VA - Appendix B.4 Specification; UPS Model Specifications (RM Series)

APPENDIX B.4 SPECIFICATION
MODEL 800 VA
RM
1000
VA
RM
1250
VA
RM
1500
VA
RM
2000
VA
RM
2500
VA
RM
600VA
RM
Capacity 800
VA
1000
VA
1250
VA
1500
VA
2000
VA
2500
VA
3000
VA
Voltage 100V, 110V, 120V, 220V, 230V, 240V, +/-25%,Single phase
INPUT
Frequency 50 or 60Hz +/-5 Hz (auto sensing)
Voltage
(on
battery)
Pure sine wave output at nominal +/-5%
F
requency
(on
battery)
50 or 60Hz +/-0.5%
OUTPUT
Voltage
Regulation
AVR
AVR automatically increase output voltage 15% above input
voltage if -9% to-25% of nominal. AVR decrease output voltage
15% below input voltage if+9% to +25% of nominal
Spike
Protection
320 Joules, 2ms
Unit Input Fuse for overload & short circuit protection
EMI/RFI filter 10Db at 0.15MHz, 50dB at 30MHz
Overload
Protection
UPS automatic shutdown if overload exceeds 110% of nominal at
20 second and 125% at 2 seconds.
Transfer Time 2~4 milliseconds, including detection time
PROTECTION
AND
FILTERING
Short Circuit UPS output cut off immediately or input fuse protection
Type Hot swappable, Sealed, Maintenance-free lead acid
Typical
Recharge Time
4 hours (to 90% of full capacity)
Protection Automatic self-test & discharge protection, Replace battery
indicator
BATTERY
Back – up Time 10 - 30 minutes (depending on computer load)
Net Weight
Kg(lbs)
18.0
(39.6)
18.0
(39.6)
23.5
(51.7)
26.1
(57.4)
28.4
(62.4)
28.4
(62.4)
35.5
Shipping
Weight
Kg(lbs)
19.5
(42.9)
19.5
(42.9)
25.0
(55.0)
27.7
(60.9)
30.0
(66.0)
30.0
(66.0)
36.2
Dimension
(mm)
W x D x
H
483x381x130 483
x531
x130
Input Inlet IEC 320 power inlet
Receptacles NEMA 5-15R (115V)/IEC 320 female appliance coupler (230V)
PHYSICAL
Storage
Condition
15000 meters max. elevation