icon is lit with the green indicator on the left side blinking slowly. When the video camera is not
connected to a computer, this icon is not displayed.
G TF card capacity indication: The (TF card capacity) icon is displayed in the bottom-right corner,
indicating the available space of the TF card. The more bars the power indicator has, the more free
space you have. If the TF card is full, the green indicator on the left side is constantly on.
At this time, on the TFT screen, you can find the following information:
A Working mode: The (Video recording) symbol is displayed in the upper-left corner, indicating
that the video camera is ready for video recording.
B Battery capacity: The (battery power) symbol is displayed in the upper-left corner, indicating the
battery level.
C Video resolution: The resolution icon in the bottom-left corner indicates the current video recording
resolution.
D Available storage capacity: If a memory card is available upon power-on of the video camera, the
(free space of the memory card) icon is displayed in the bottom-right corner.
E There is no response for < and > keys in the preview state.
F When using the supplied power supply or USB cable to recharge the battery in power off, the
"Working/recharging red indicator" on the top of the video camera blinks slowly. The red indicator will
be constantly on upon full recharging. The recharging time lasts for about three hours.
Note: Before using the video camera, check whether the battery has sufficient power. If the power level is low,
use the power adapter supplied with the video camera or USB cable to recharge the battery. The
"Working/recharging red indicator" blinks slowly during the recharging. Upon full recharging, the red indicator
is constantly on, and the (battery power) symbol is displayed on the TFT screen.
②
Formatting the Micro SD card
To Next Page
Loading...
