www.aeg-automotive.com
22
During installation be sure cables
Do not mount these to conduc-
tive materials. If cables are run
through walls with sharp edges
(metal sheets, etc.) use ductwork or
conduit to prevent cable damage.
Protect cables from damage, do not
cables.
-
camera cable to the vehicle power.
Refer to the manual for notices and
the automaker‘s wiring diagram.
and equipment in the vehicle is not
impaired! Please follow the instruc-
tions of the automaker‘s manual.
and damage to the backup camera
-
Be sure the ignition and all vehicle
-
ing with installation of the backup
Improper installation of the backup
vehicle‘s electrical equipment. This
Risk of damage!
Improper installation of the backup
vehicle‘s electrical equipment.
Do not use the backup camera
-
tive equipment or other external
devices.
Special notes
The reversing camera works with
shortwave radio signals. These can
interfere with the operation of other
electronic and medical devices.
its use is prohibited. Do not use
the device in medical facilities, on
aircraft, at gas stations, or near au-
controlled devices. Keep the device
-
ers and other medical devices.
Depending on ambient conditions,
or objects.
Extreme high or low temperatures
cause the camera to not function
Bright light hitting the camera lens
overexposed and not being dis-
To Next Page
Loading...