EasyManua.ls Logo

AEG 11125 - Cleaning, Care and Maintenance; Disposal; EU Declaration of Conformity; Replacing Fuses

AEG 11125
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English 29
Service
-

operating instructions, or if a problem should occur
against all expectations, please get in contact with

Disposal
The packaging consists of non-contaminating mate-

point.
Do not throw electrical appliances in with
domestic waste!
In accordance with European Directive 2012/19/
EC for waste electrical and electronic equipment
-




EU Declaration of Conformity
MTS MarkenTechnikService GmbH & Co. KG

Reversing Camera” (11125) complies with Directive
2014/53/EU.

please visit:
http://iuqr.de/11125

Subject to change for the purpose of technical
advances. Accessories not included.
CLEANING, CARE AND
MAINTENANCE
Caution!



cloth. Do not use liquids or harsh cleaners as

surface of the equipment and the backup camera

enter the equipment! Never immerse the equip-







generated under these conditions could damage
the electronics!

readjust it. There are 4 screws at the back of the

these screws to secure the swiveling camera. This
requires the camera to be dismantled.
Replacing fuses
A fuse inside the car plug safeguards the device.
This will respond in the event of a short circuit or
voltage peaks and must then be replaced.
Attention:

otherwise be damaged.
1. Unscrew the retaining pin (1) with the fuse cover
(2) from the car plug (4).
2. Insert a new micro-fuse (3) of the same rating
(see Technical Data).
3. Replace the retaining pin (1) with the fuse cover
(2) in the car plug (4).
1
2
4
3

Table of Contents