- 6 -
BEFORE SEWING
1. Fit plug into the machine.
2. Insert plug into the main socket.
3. Sewing speed can be varied by the foot
control.
Use only ZHEJIANG FOUNDER model
KD-2902 foot controller with sewing
machine.
.CAUTION: Please always unplug the power plug before you change the bulb or
perform maintenance work to the machine so that you prevent deadly
peril and electric shock.
Bulb replacement:
1. Open face cover in direction of arrow.
2. Remove bulb by unscrewing it
counter-clockwise.
3. Install a new bulb by screwing it in
clockwise.
4. Use a 15 watt bulb. (max)
Power supply / Power supply plug
Speed Controller
Power supply
Plug receptacle
machine plug
Sew lamp
To Next Page
Loading...
