EasyManua.ls Logo

AEG BO4GEMKM - 6.4 Setting the Combi function; 6.5 Setting the Microwave Quick Start function; 6.6 Heat-up indicator; 6.7 Using: Fast Heat Up Indicator

AEG BO4GEMKM
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4. Press to turn on the Microwave
function.
5. Press . The function: Duration is set to
30 seconds and the microwaves starts to
operate.
Each press of adds 30 seconds to the
time of the function: Duration.
If you do not press , the oven turns off
after 20 seconds.
6. Press to set the function: Duration.
You can change the microwave power
(press and then or ) and the
function: Duration any time when the
Microwave function works.
7. When the set time ends, a signal sounds
for 2 minutes. The Microwave function
turns off automatically. Press any symbol
to stop the signal.
To turns off the Microwave function,
press .
If you press or open the door, the
function stops. To start it again, press .
The maximum time of microwave functions
depends on microwave power you set:
MICROWAVE POW‐
ER
W
MAXIMUM TIME
min
100 - 600 90
>600 7
6.4 Setting the Combi function
1. Remove microwave bottom glass plate.
2. Turn on a heating function.
3. Press and follow the same steps as
when you set the Microwave function.
When you use the Microwave function in
Combi mode the Microwave power cannot be
more than 600 W.
For some functions the microwave will
start as soon as the set temperature is
reached.
Functions not available for the Combi
function: Favourite Programme, End Time ,
Set + Go, Heat + Hold.
6.5 Setting the Microwave Quick
Start function
1. If necessary, press to turn off the
oven.
2. Press to turn on the Quick Start
function.
Each press of adds 30 seconds to the
Duration time.
You can change the microwave power
(refer to "Setting the Microwave
function").
3. Press to set the time for the function:
Duration. Refer to "Clock functions"
chapter, Setting the clock functions.
6.6 Heat-up indicator
When you turn on a heating function, the bar
shows that the temperature increases. When
temperature is reached the signal sounds 3
times, the bar flashes and disappears.
6.7 Using: Fast Heat Up Indicator
Use this function before you put the food in
the oven.
This function reduces the heat-up time. It is
not available for some oven functions.
- press and hold.
ENGLISH 11

Table of Contents

Related product manuals