food sensor. The tip of the food sensor
should not touch the bottom of a baking
dish.
4. Cover the food sensor with the remaining
ingredients.
5. Put the plug of the food sensor into the
socket located in the front frame of the
appliance.
The display shows the food sensor symbol.
6. Press or in less than 5 seconds to
set the food core temperature.
7. Set a heating function and, if necessary,
the oven temperature.
8. To change the food core temperature,
press .
When the dish is at the set temperature, an
acoustic signal sounds. The appliance
deactivates automatically.
9. Touch any symbol to stop the signal.
10. Remove the food sensor plug from the
socket and remove the dish from the
appliance.
WARNING!
There is a risk of burns as the food
sensor becomes hot. Be careful when
you unplug it and remove it from the
food.
10. ADDITIONAL FUNCTIONS
10.1 Favourite Programme
You can save your favourite settings, such as
duration, temperature or heating function.
They are available in the menu: Favourite
Programme. You can save 20 programmes.
Saving a programme
1. Turn on the oven.
2. Set a heating function or an automatic
programme.
3. Press again and again until the display
shows: SAVE.
4. Press
to confirm.
The display shows the first free memory
position.
5. Press to confirm.
6. Enter the name of the programme.
The first letter flashes.
7. Press or to change the letter.
8. Press .
The next letter flashes.
9. Do step 7 again as necessary.
10. Press and hold to save.
You can overwrite a memory position. When
the display shows the first free memory
position, press
or and press to
overwrite an existing programme.
You can change the name of a programme in
the menu: Edit Programme Name.
20 ENGLISH
To Next Page
Loading...
Need help?
General
