Step 2
Set the maximum temperature for the function: .
Let the oven operate for 1 h.
Step 3
Set the maximum temperature for the function: .
Let the oven operate for 15 min.
The oven can emit an odour and smoke during preheating. Make sure that the room is ventilated.
7. DAILY USE
WARNING!
Refer to Safety chapters.
7.1 How to set: Heating functions
Step 1 Turn the knob for the heating functions and select a heating function.
Step 2 Turn the control knob to set the temperature.
- press and hold to turn on the function: Fast Heat Up. It is available for some oven functions.
Steam cooking
Make sure that the oven is cold.
Step 1 Step 2 Step 3 Step 4
Preheat the empty oven
for 10 min to create hu‐
midity.
Put food in the oven.
Fill the cavity embossment with tap water.
Select the steam
heating function.
Set the tempera‐
ture.
The maximum capacity of the cavity embossment is 250 ml. Do not refill the cavity embossment during cook‐
ing or when the oven is hot.
When the steam cooking ends:
Step 1 Step 2 Step 3
Turn the knob for the heating func‐
tions to the off position to turn off
the oven.
Carefully open the door. Released hu‐
midity can cause burns.
Make sure that the oven is cold.
Remove the remaining water from
the cavity embossment.
ENGLISH 11
To Next Page
Loading...
Need help?
General
